How To K2 - All Comments

Infopath Administrator-Approved Forms and K2 processes

Ramble On — Thu, 12 Nov 2009 09:47:48 GMT

... or what is behind the " Publish to: Local or Network Location " in the Infopath Integration

[HOW-TO] Deploying a K2-Infopath form as a Sharepoint administrator-form...

Ramble On — Mon, 09 Nov 2009 16:30:33 GMT

... or what is behind the "Publish to: Local" in the Infopath Integration Wizard. In some cases

re: Using “code behind” with InfoPath forms, SharePoint and K2

Jochen — Fri, 18 Sep 2009 07:22:11 GMT

Very good post. This solved the problem.

I also had contact with K2 support concerning this issue. Your solution and the solution I got from K2 support are quite the same. Well done!

re: Using “code behind” with InfoPath forms, SharePoint and K2

sboldt — Wed, 16 Sep 2009 19:07:17 GMT

Ok, I finally got it. Here is the way that I was able to get it all working. Thanks to K2 support help and a combination of tweaks, I was able to get the forms to pull up in the browser at each step in the workflow. I wrote it all down in my blog which you can find here:

http://www.stevenboldt.com/blog/post/2009/09/15/How-to-publish-K2-BlackPoint-workflow-InfoPath-Form-Services-with-code-behind-to-SharePoint.aspx

Cheers!

Steve

re: Using “code behind” with InfoPath forms, SharePoint and K2

Jochen — Tue, 08 Sep 2009 13:49:11 GMT

I have tried a workaround..

First I designed a "normal" InfoPath process with no code behind and deployed the process as usual. Then I added code to my form and deployed the process and the form as it is mentioned above. I acvitvate the server form template to my site collection and added this InfoPath form content type to the form library where I first deployed the "normal" InfoPath process to.

It worked. I hope this was not only luck...

re: Using “code behind” with InfoPath forms, SharePoint and K2

sboldt — Fri, 04 Sep 2009 17:53:26 GMT

I get the same issue the Sriwantha mentioned. When I go to the form library and select a new IP form, it opens up fine in the browser. However, when it proceeds to the next step in the workflow, when I go to the K2 worklist and try open the form there, it opens it up in IP.

Steve

re: Using “code behind” with InfoPath forms, SharePoint and K2

sriwantha — Thu, 03 Sep 2009 11:00:22 GMT

Okey guys… this works perfect until you get a task action in the “work list” web part. You can of course complete the workflow by clicking the task action menu and then directly giving the action command. But when you try to open the InfoPath form from the k2 task action (k2 task action list item--> (drop down menu)--> open) browser downloads the InfoPath file and then try to open it through the InfoPath client. (It never get opened in the web browser !!!!!) Now our form ,being a full trusted one, fails to open by giving an error message as follows.

“The form template is trying to access files and settings on your computer. InfoPath cannot grant access to these files and settings because the form template is not fully trusted. For a form to run with full trust, it must be installed or digitally signed with a certificate.”

The problem now is HOW TO --> open the form in browser directly from k2 task action ?

Note: Your method works only during initial submission. After that you can’t open the InfoPath form the browser

Sriwantha Sri Aravinda Attanayake

Using "code behind" with InfoPath forms, SharePoint and K2

Johnny's K2 Blog — Wed, 01 Jul 2009 04:09:15 GMT

Saw that there was this new "How-to" post on using code behind in InfoPath forms. Quite a useful reference

re: How to K2 Kerberos edition

loveric — Fri, 24 Apr 2009 06:19:36 GMT

Thanks~

K2 Blackpearl的Outcomes Actions和Line Rule

geff zhang — Wed, 22 Apr 2009 07:24:45 GMT

使用K2blackpearl设计流程的时候有两个重要概念是Outcomes和Actions。Actions代表的是人与工作流交互的时候，对流程处理的意见（例如同意/不同意/驳回），K2的Act...

re: How to K2 Kerberos edition

pblose — Tue, 03 Feb 2009 14:14:46 GMT

Highly recommended! Even though I had rather extensive experience troubleshooting kerberos configuration this video still gave me additional (and simpler) ways to determine what is going wrong. Thanks!

Fixing Running Workflow Instance Errors with K2[blackpearl]…. « A Consulting Technologist’s Web [of thoughts]

Sat, 09 Aug 2008 03:15:32 GMT

PingBack from http://srikantha.wordpress.com/2007/08/25/fixing-running-workflow-instance-errors/

re: The Environment Library

camilo — Wed, 26 Mar 2008 00:06:14 GMT

Hi Chris, I'm after the source code of your presentations, that asset process and related stuff.

Could you publish it?

Cheers.

re: Video 6 is live

Bob — Fri, 28 Dec 2007 23:17:51 GMT

I just wanted to add that another source of information on this topic is the newly released K2 blackpearl SDK available for download at: https://portal.k2workflow.com/downloads/bp/Default.aspx#K2%20blackpearl%20SDK

re: Integrating SmartObjects with InfoPath

chrisg — Wed, 14 Nov 2007 02:00:30 GMT

Also check out some commentary by an Insider